Home

MGOe magnet

For instance, a grade 48 Neodymium Iron Boron magnet will generally have an advertised (BH)max of 48 MGOe. (The unit MGOe, Gauss•Oerstedx10^6, or Mega-Gauss•Oersted is used in the CGS (Centimeter-Gram-Second) unit system A magnet grade is a good measure of the strength of a magnet. In general, higher numbers indicate a stronger magnet. The number comes from an actual material property, the Maximum Energy Product of the magnet material, expressed in MGOe (Mega Gauss Oersteds). It represents the strongest point on the magnet's Demagnetization Curve, or BH Curve MgOe stands for Megagauss Oersteds and indicates how much energy a piece of magnet material can supply to a circuit. IMI's UHI-50 is the most powerful circuit available in the marketplace, featuring greater pull-test strength and holding value than any other circuit

Neodymium magnets will lose about 1% of their magnetic strength every 10 years due to self demagnetization. BHMax (MGOe) - Maximum Energy Product Measured in Mega Gauss Oersteds This is a direct measurement of a materials maximum magnetic strength after the magnet is fully saturated charged by an external magnetic field Neodymium magnets produce the highest MGOe of any permanent magnet material. The most common grades of Neodymium magnets are N35, N38, N40, N42, N45, N48, N50, N52, and N55. For Samarium Cobalt (SmCo) Magnets, the BHmax will range from 16 MGOe to 32 MGOe. Again, like neodymium magnets, the higher the number, the stronger the magnet The maximum energy product of a magnet is measured in Mega Gauss Oersteds (MGOe).This is the primary indicator of a magnets 'strength'. In general, the higher the maximum energy product value, the greater the magnetic field the magnet will generate in a particular application. Maximum energy product, also referred to as BHmax is calculated. An N42 magnet has a maximum energy product of 42 MGOe, while an N52 magnet has a maximum energy product of 52 MGOe. When comparing neodymium magnets, we find that the pull force relates directly to this number. If everything else is equal, a magnet with a BHmax that's 10% higher will have about a 10% higher pull force

Contact Bunting for our Custom Magnets and Magnetic Assemblies. Get a Quote! Contact Us. Products. Magnet Materials. Magnet Material Comparison; Magnetic Characteristics; Magnetization; Magnet Stability; MGOe. kiloJoule per cubic meter, kJ/m3 . Convert Reset. 12 Industrial Dr, DuBois, PA 15801 1-800-437-8890 1-814-375-9145. DuBois. Powerful new grade of Neodymium added to our magnet offerings. A powerful new grade of Neodymium is now available at Dura Magnetics: 55 MGOe Neodymium. As the strongest rare earth magnetic material available for commercial use, N55M is about five- to six-percent stronger than N52 MGOe, our previously highest available grade

NdFeB magnets are available in both sintered and bonded forms. Sintered NdFeB offers the highest magnetic properties (28 MGOe to 50 MGOe) while Bonded NdFeB offers lower energy properties. Although bonded magnets do not possess magnetic properties as advanced as those of sintered magnets, they can be made in shapes and sizes that are difficult. Samarium Cobalt Magnets. Like neodymium iron boron, samarium cobalt is a rare earth material available in both sintered and bonded forms. The two materials share many attributes, including High Br, high Hc, relatively high BHmax (approximately 18-33 MGOe), high resistance to demagnetization, low machinability, and suitability for multiple pole magnetization given the proper magnetizing.

The oersted is defined as a dyne per unit pole. The oersted is 1000/4π (≈79.5774715) amperes per meter, in terms of SI units. The H-field strength inside a long solenoid wound with 79.58 turns per meter of a wire carrying 1 A is approximately 1 oersted. The preceding statement is exactly correct if the solenoid considered is infinite in. An alloy composed of aluminum, nickel, and cobalt, alnico magnets have been popular since the 1930s. Alnico magnets are available in cast and sintered forms, as well as in custom configurations. Major Characteristics. High Br, low Hc, BHmax in the 5 MGOe range. Most temperature stable of all magnet types

What is Maximum Energy Product / (BH)max and How Does It

  1. Energy Product of 32 MGOe and a reversible temperature coefficient of -0.03%/°C. Bonded SmCo magnets. The bonded SmCo magnets are anisotropic ones manufactured with magnet powder held in place by epoxy resins or other special binders. Energy products of the bonded magnet range from 5 MGOe to 15.1 MGOe. Sintered SmCo magnets
  2. The number that follows is a little more technical as this represents the maximum energy product of the magnet in 'Mega-Gauss Oersteds' (MGOe). This is the primary indicator of a magnets 'strength'. Simply, the higher the maximum energy product value, the greater the magnetic field the magnet will generate in a particular application
  3. The units are almost always MGOe or 10 6 erg/cm 3. The Grade of a magnet usually incorporates this number. For example: N40 Grade NdFeB has a maximum energy product between 38-41 MGOe. BHmax is the primary indicator of the magnet material strength
  4. Neodymium magnets come in different grades such as N35, N38, N40, N45, N48, N50, N54, N42, N52 or N42SH. It all starts with the letter 'N', all the names of neodymium magnets begin with 'N' for neodymium. The number that follows is a little more technical as this represents the maximum energy product of the magnet in 'Mega-Gauss Oersteds' (MGOe)

These magnets can be found in high-performance motors, actuators, speakers, hard disk drives, sensors, and numerous other areas. Hitachi Metals America, Ltd. (HMA) offers a complete line of Nd magnets. Characteristics Lower costs than samarium cobalt High energy products (up to 56 MGOe) Good mechanical characteristic Ceramic Magnets Technical Data; Grade: 5 Shapes: Discs & Cylinders Magnetization: Axially Magnetized Br: 3,950 Gauss BHmax: 3.60 MGOe Hc: 2,400 Oersteds Hci: 2,450. N55 magnet is the strongest commercial magnet at present. The strength of rare earth neodymium magnet is measured in the range of 24 mgoe-55 mgoe. This grand of neodymium magnet is 5-6% stronger than N52 Order therapeutic magnets & magnetic mattress topper/blankets from Q Magnets Magnetic therapy shop. Explore our magnets for sale that provide instant pain relief using multipolar magnetic therapy technology. 30-day trial & free international shipping for all orders over AUD 200

Magnetic Properties. The magnet curves in the graph below are representative of the typical range used in most applications. We also have a comprehensive range of other magnet products which you can browse in the table below. Please contact us if you would like more information or discuss your specific requirements The main 3 grades of flexible magnets are Isotropic, Semi-anisotropic, Anisotropic, although the magnetic properties with (BH)max from 0.6 MGOe to 1.6 MGOe. Flexible magnets are flexible and soft like their name, it can easily be cut to the shape/size required using a knife, also easily bent, twisted, slit, or coiled, no loss of magnetic. Flexible Magnet. Flexible magnets are manufactured by binding ferrite or Rare Earth magnet powders in a variety of carriers, such as vinyl such that the magnet material that can be bent, twisted, coiled. Available grades are from 0.6 MGOe, to about 1.6 MGOe in the Ferrite based materials and up to about 6 MGOe in the Rare Earth based materials Samarium Cobalt magnets Series 1-5 (SmCo5) These samarium cobalt magnet alloys have one atom of rare earth Samarium and five atoms of Cobalt. By weight this samarium cobalt magnet alloy will typically contain 36% Samarium with the balance Cobalt. The energy products of these samarium cobalt alloys range from 16 MGOe to 25 MGOe

3/8 in. Neodymium Rare-Earth Magnet Discs (12 per Pack) Use Super Magnets 3/8 in. Neodymium Rare-Earth Use Super Magnets 3/8 in. Neodymium Rare-Earth Magnet Discs (12 per Pack) for a wide variety of temporary fastening jobs. These ring-shaped magnets are made of neodymium and offer up to 1.5 lb. of pull Successful development in 1970, samarium cobalt magnet is the second strong magnets, the magnetic has higher maximum magnetic energy product (BHmax), high coercivity, fragile, easy to crack. Samarium cobalt magnet maximum magnetic energy product range from 9 MGOe to 31 MGOe Magnet Source-7219 Chrome Plated Magnet Base With Clip, 1 Diameter (Pack of 2) 4.7 out of 5 stars. 570. $4.77. $4. . 77 ($2.39/Magnets) Get it as soon as Mon, Mar 1. FREE Shipping on orders over $25 shipped by Amazon Buy Top Quality Neodymium Magnets. Great Selection & Prices. Shop Now

Magnet Grade

The energy product range for the 1-5 series is 15 to 22 MGOe, with the 2-17 series falling between 22 and 32 MGOe. These magnets offer the best temperature characteristics of all rare earth magnets and can withstand temperatures up to 300° C. Sintered samarium cobalt magnets are brittle and prone to chipping and cracking and may fracture when. flexible magnets are available from 0.6-1.8 MGOe, while those with Rare Earth-based materials can reach 6 MGOe. Grading varies by composition. MAGNET TYPES. 3 800-747-7543 BENEFITS OF . USING FLEXIBLE MAGNETS The easy manipulation of flexible magnets permits design . innovations and automate Magnets can be supplied thermally stabilized or magnetically calibrated to customer specifications. Additional grades are available. Please contact the factory for information. N30-0.750 180 Therm 460 al Properties 285 Flexural Strength These are also referred to as Neo or NdFeB magnets. They offer a combination of high magnetic output at. Magnetic enerty E: Joule (BH・AL/2) J: Erg (B 2 A/8π) erg: 1J=10 7 erg: 1erg=10-7 J: Magnetic attractive force F: Newton (B 2 A/2μ0) N: Dyne (B 2 A/8π) dym: 1N=10 5 dyn (1N=0.102kgf) 1dyn=10-5 N (1kgf=9.807N) ※Remark1:A is a cross-section area (m, cm) ※Remark2:L is a flux path length (m, cm) Please contact us for more details.

Neodymium magnets (NdFeB), or neo magnets offer the highest energy product of any material today and are available in a range of shapes, sizes and grades, including GBD. Used in various applications - high performance motors, brushless DC motors, magnetic separation, magnetic resonance imaging, sensors & loudspeakers The samarium cobalt magnet energy products of these alloys are 18 Mega Gauss Oersteds (MGOe), 22 (MGOe) and 26 (MGOe). The magnets are rich in cobalt and contain other elements such as iron and copper. Safety Tips When Using Samarium Cobalt. Samarium cobalt is manufactured by a sintering process, and inherent cracks are possible.. Material: Neodymium magnets Certification:RoHS passed Grade: N35 BR:14000-14500 GAUSS. Hcj 11 KOe. Hcb10.5 KOe. BHmax: 48-51 MGOe. Magnetization: Axially magnetized / Poles on Flat Ends . Max Operating Temperature: 80C/176F Plating: nickel copper nickel triple layer plated Volume: 251mm Based on calculations, the resulting permanent magnets may have an energy product theoretically as high as 33.5 MGOe when the Fe 16 Na 2 crystals are isotropic, rising to 134 MGOe when anisotropic. Thus, getting the right kind of anisotropic crystals is a key to boosting magnet strength Flexible Magnet. Flexible magnets are manufactured by binding ferrite or Rare Earth magnet powders in a variety of carriers, such as vinyl such that the magnet material that can be bent, twisted, coiled. Available grades are from 0.6 MGOe, to about 1.6 MGOe in the Ferrite based materials and up to about 6 MGOe in the Rare Earth based materials

Industrial Magnetics, Inc

400°F (204°C) @ 3.5 MGOe (ceramic) 176°F (80°C) @ 52-55 MGOe (rare earth) 248°F (120°C) @ 48 MGOe (rare earth) 356°F (180°C) @ 38 MGOe (rare earth) 662°F (350°C) @ 30 MGOe (rare earth) Tube Spacing: Magnetic grates are designed to perform at highest performance when manufactured with 2″ horizontal centers between the tubes. This. Rare Earth Neodymium Magnets (NdFeB) Neodymium magnets (NdFeB) (also known as Rare Earth magnets) are, size-for-size, the strongest type of any magnet material that is commercially available ,they are stronger than Samarium Cobalt (SmCo), Alnico and Ferrite. Neodymium NdFeB magnets are often the ideal first choice for many applications because they offer a maximum performance from the smallest. One MGOe is 1,000,000 Gauss Oersted. For example, a grade N45 would have a Maximum Energy Product of 45 MGOe. The higher the grade the stronger the magnet. Magnetic Magnets specialise in the high end of the magnet grades, typically N45 and N50 grades and are specified on each product page. The higher the grade the more expensive the magnets are.

Permanent Starter Motor Magnets Manufacturers, Suppliers

History of Magnetic Materials 7.0 MGOe Sm 2Co 17 SmCo 5 NdFeB 50 MGOe 35 MGOe 30 MGOe 20 MGOe NdFeB 200° C Ferrites Alnico 5 KS Steel MK Steel 3.8 MGOe 6.0 MGOe Loadstone 2.5 MGOe <1/2 MGOe 400 BC 1930 1940 1950 1960 1970 1980 1990 2000 Earliest written reference to magnetism: The lodestone makes iron come or it attracts it from 400BC China. Ceramic Magnets Technical Data; Grade: 5 Shapes: Discs & Cylinders Magnetization: Axially Magnetized Br: 3,950 Gauss BHmax: 3.60 MGOe Hc: 2,400 Oersteds Hci: 2,450.

MGOe, max = Br^2 / 4 / 1000000, or. MGOe, max = 0.25 x 10^-6 * Br^2 . The object of this exercise is to show that Br is the limiting factor. If we could make a permanent magnet from a material with the Permendur composition of 50/50 iron and cobalt, with a Br of 24 kG, then the maximum energy product would be. 0.25 * 24 * 24 = 144 MGOe The grade N45SH means that the relative sintered NdFeB magnet's (BH)max is 45 MGOe and its Hcj is above the level of 20 kOe (in CGS unit) or 1592 kA/m (in SI unit). The grade N52 with default right letter part means that the relative sintered NdFeB magnet's (BH)max is 52 MGOe and its Hcj is above the level of 12 kOe or 955 kA/m

K&J Magnetics: DY0X0-N52

Salient magnetic properties are: Type BHmax (MGOe) Tc (°C) Tmax (°C) Ceramic 3.45 460 300. NdFeB 20-40 310 150. (Data courtesy of Dexter Corp.) The Energy Product, BHMax in MegaGauss-Oersteds (1 MGOe = 7956 J/m^3), is a measure of the Maximum Energy Density (proportional to Magnetic Field Strength squared) that can be produced in an given air. This number represents the maximum energy product in Mega-Gauss Oersteds (MGOe) where 1MGOe (cgs units) equals 7958kJ/m3 (SI units). The range available used to be N24 up to N52. The lower grades are no longer made and the range now starts at around N30 or N33. N50 is the highest readily available grade. N52 is possible but only in certain sizes There are 3 grades of magnetic sheet: Isotropic, Semi-anisotropic, Anisotropic, although the magnetic properties with (BH)max from 0.6 MGOe to 1.6 MGOe, special magnetic properties can be produced once the MOQ is met

K&J Magnetics: DZ0X8-N52

Magnetic Materials This unique structure in the magnetics industry allows our customers to rely on us for magnetic materials, magnetic components, non-magnetic components, and process control from prototype to production. Selection of the correct magnetic material is critical for any application. Below is an overvie Grade: 剩余磁通密度 (BR) 矫顽力 (HCb) 内禀矫顽力 (Hcj) 最大磁能积 (BH)max: N35: 11.7-12.1 KGs >11.0 KOe >12 KOe: 33-35 MGOe: N3 A hard magnetic property with high coercivity (1910 Oe), high Ms (245 emu/g) and promising energy product (Max. 20 MGoe) is clearly observed on the sample. Figure 1(a) shows in-plane hysteresis. NeoBlend™ Molded Neodymium Iron Boron (NdFeB) rare earth magnets open up a new realm of possibilities and options for engineers. High magnetic values and reduced size make Bremag the ideal solution for miniaturization where weight at space are at a premium. At Magnet Applications, we offer the unique ability of Compression and Injection Molded NeoBlend [

Materials and Grades Amazing Magnet

Understanding Magnet Grades and Magnet Tables - SM Magnetic

China Colored Magnetic Strips Factory & Manufacturers

Compared to the La/Ce-free starting magnet (B r = 13.02 kGs, H cj = 14.4 kOe and (BH) max = 41.9 MGOe), SMP magnets suffer sharp deteriorations in magnetic performance, consistent. 7-15 ¥ìm. 12 hours. 24 hours. Each individual layer of Nickel and Copper are 5-7 ¥ìm thick. The Gold and Silver plating layers are 1-2 ¥ìm thick. Test results shown to allow comparison between plating options. Performance in your application under your specific test conditions may vary. Salt Spray testing conducted with a 5% NaCl solution. Introduced to the market in the 1970's, samarium cobalt magnets continue to be used today. Samarium cobalt magnets are divided into two main groups: Sm1Co5 and Sm2Co17 (commonly referred to as 1-5 and 2-17). The energy product range for the 1-5 series is 15 to 22 MGOe, with the 2-17 series falling between 22 and 32 MGOe Neodymium Iron Boron magnets are a type of rare earth alloy that typically has two atoms of Neodymium (Nd), 14 atoms of Iron (Fe), and one atom of Boron (B) as its primary elements, hence their chemical composition Nd 2 Fe 14 B, which is commonly abbreviated as NdFeB. There are other elements that are used to increase the coercivity, to gain lower oxidation characteristics, and to obtain other. Product Summary. 10-pc. neodymium disc magnet set. Each measures 5/16 in. dia. x 1/8 in. thick. Also known as rare earth magnets, these powerful permanent magnets are made of neodymium, the strongest magnet material available. Perfect for woodworking projects, attaching name badges to clothes, or for use in science experiments

However, there is no report on the formation of Fe16N2 magnet with high Br and large Hc in bulk format before. In this paper, we successfully synthesize free-standing Fe16N2 foils with a coercivity of up to 1910 Oe and a magnetic energy product of up to 20 MGOe at room temperature ALB Materials Inc 2360 Corporate Circle. Suite 400 Henderson, NV 89074-7739 United States E-mail: sales@albmagnets.co

How Is The Strength Of A Magnet Measured First4magnets

K&J Magnetics - Magnetic Unit Converte

Unit Conversion Calculator - Magnet Application

Samarium-cobalt magnets typically run from 18 to 26 MGOe while neodymium ranges from 8 to 35 MGOe. In comparison, the most widely used ferrite magnets only have an MEP of 1.8 to 4.5 MGOe. Neodymium magnets make for small, lightweight motors with up to 50% more torque than ordinary ones having comparable dimensions The final energy product for an N45 magnet is between 43-45 MGOe. In the high-grade N52 - where the limit of mass production seems to be at the moment - it is even harder to achieve perfection. Especially in larger magnets. So if you just want to by a big size customize 100% N52 Neodymium in big quantity, the price will be very high

8mm Neodymium Magnet - ALB Materials Inc

Buy Magnets Online. Huge Selection. Fast Shipping! Quantity Symbol CGS SI Magnetic flux density, magnetic induction Amps per meter, A/m. kiloamps per meter, kA/m. Maximum Energy Product (BH)max. megaGaussOersteds, MGOe. kiloJoule per cubic meter, kJ/m3 . Convert Reset. 1150 Howard Street Elk Grove Village, IL 60007 800-232-4359 847-593-2060. Neodymium magnets. The following table provides an overview of the physical properties of Neodymium magnets. Further useful information can be found in the Summary table for our neodymium magnets. Here you can sort the magnets according to their adhesive force, dimensions and weight, among other things. Grade

N55M magnets now available at Dura Magnetic

SmCo magnets are often assembled into products using superglues such as Loctite 325. It's best to avoid placing mechanical stress on this material, and always ensure that bonding surfaces are clean and dry prior to bonding. Safety Precautions for Samarium Cobalt Magnets. SmCo magnets are hard, very brittle and high in magnetic strength Intrinsic properties of the 1:7-type Zr-doped Co-lean Ce-magnet in comparison with similar 2:17- and 1:5-matrials. The 1:7-type material is the middle point that allows potential energy products of Ce-magnets > 20 MGOe, by coupling high Ms of 2:17 with high Ha of 1:5 As the third generation rare earth magnets, NdFeB (Neodymium Iron Boron) magnets provide the highest maximum energy product among permanent magnets. The typical BHmax for sintered NdFeB magnets is 35 MGOe (N35), which is about 8 times of those for Ceramic and AlNiCo magnets, and is about 35% higher than that for most Samarium Cobalt magnets Samarium-cobalt offers a balance of strength and temperature resistance. Strong and compact, these rare earth magnets resist corrosion and can handle higher temperatures than other rare earth magnets.. Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings

K&J Magnetics: D28-N52

PERMANENT MAGNET SOLUTIONS. EEC was one of the first permanent magnet manufacturers, and because we control every step of the production process, from material selection, to alloy melting, to machining, we deliver some of the highest performing materials and products in the industry including Samarium Cobalt, Neodymium Iron Boron, and Alnico. BHmax: 42 MGOe. Super strong Neodymium (NdFeB) magnets with 4/40 internal screw thread attach right onto any Voltaic solar panel with corner screws (2, 3.5, 6, 9 and 17 Watt solar panels). Each pack includes 4 magnets so you can securely mount solar panels on any metal surface. ITEM: MAGNET-4 The range of Neo grades is typically 33 to 52 MGOe. These ranges allow for balancing cost, magnetic performance, and operational temperature resistance. Stanford Magnets has available for sale N35, N40, N42, N45, 50 & neodymium magnets N52 which are the most popular Super Strong Rare Earth Magnets these days. Retail, Wholesale & Bulk neodymium. • 52-55 MGOe rare earth magnetic cartridge Easy clean design with removable magnetic core allows magnet to operate at maximum performance between cleanings. To clean: 1. Unlatch clamps, open door and turn magnet 90 degrees 2. Pull magnet cartridge towards operator until removed from housing. With magnet removed, tramp metal will fall onto housin

Neodymium Magnet,NdFeB Magnet,rare earth magnet

Alnico magnets have the best temperature coefficients of any magnet material. Alnico magnets should be regarded as the best choice in extremely high temperature applications. Alnico magnets can be produced by Casting or Sintering. Alnico is also rarely made by Bonding within a binder. Cast Alnico is the most common form of Alnico magnet The grade N42 means neodymium magnet has a Maximum Energy Product of 42 MGOe. It refers to the maximum magnetic energy that the material can be stored. It can be showed by the magnet's Demagnetization Curve, or BH Curve - the strongest point is (BH)max. Generally speaking, the higher the grade, the stronger the magnet Neodymium magnets are categorized by N-ratings, typically formed by an N, then a number, and then sometimes a couple more letters. The N stands for neo, an industry simplification of neodymium. The numbers, however, are more complicated. In general, the number indicates the strength of the magnet, measured in Megagauss Oersted (MGOe) Description Sintered NdFeB magnets are the most powerful commercialized permanent magnets available today, with maximum energy product ranging from 26 MGOe to 52 MGOe. Nd-Fe-B is the third generation of permanent magnet developed in the 1980s. It has a combination of very high remanence and coercivity, and comes with a wide range of grades, sizes and shapes

K&J Magnetics: DA2-N52

What does a stronger magnet mean? In general, higher numbers indicate a stronger magnet. The number comes from an actual material property, the Maximum Energy Product of the magnet material, expressed in MGOe (Mega Gauss Oersteds). It represents the strongest point on the magnet's Demagnetization Curve, or BH Curve (BH)max, the maximum energy product, of neodymium magnets is highest of any kind of permanent magnets today in the world. (BH)max at different grades of neodymium magnets is 27 to 52 MGOe. Neodymium magnets have extremely resistance to demagnetization with Hci, Intrisic coercive force, over 12,000 Oe Energy product ranges from 18 MGOe to about 33 MGOe. Relative cost index (by weight): 60. AlNiCo (Aluminum-Nickel-Cobalt) An alloy of aluminum, nickel, and cobalt, Alnico magnets have been popular since the 1930s. Alnico magnets are available in cast and sintered forms. They exhibit high Br, but low Hc, and BHmax in the 5 MGOe range Magnet Material Specifications C1/Y10T C5/Y25 Alnico-5 Maximum Operating Temperature 300°C 300°C 525°C Curie Temperature 450°C 450°C 860°C Temperature Coefficient of Flux Density -0.20%/°C -0.20%/°C -0.02%/°C Maximum Energy Product 1 MGOe 3.4 MGOe 5.5 MGOe Residual Induction 2175 Gauss 3800 Gauss 12800 Gaus Compared to the Ce-free (Ce-0) magnet with H cj of 13.8 kOe, B r of 14.1 kG and (BH) max of 48.7 MGOe, the magnetic properties of Ce-27 SMP magnet deteriorate drastically to H cj of 10.4 kOe, B r of 12.8 kG and (BH) max of 39.0 MGOe. It is due to the magnetic dilution effect that Ce substituting for Nd in the 2:14:1 phase lattice decreases the.

Rare Earth > Adams Magnetic Products Co

The series 1:5 magnets have a magnetic strength rating of 16 to 25 MGOe, while series 1:7 has a magnetic strength rating of 20 to 32 MGOe. The way magnetic strength is measured is through the energy in products with units of megagauss-oersteds or MGOe. Samarium cobalt magnets are manufactured through the use of sintering and a series of. Master Magnetics 1.6 in. Alnico Horseshoe Magnet 22 lb. pull 5.5 MGOe Red 1. 5 out of 5 stars (2) 2 product ratings - Master Magnetics 1.6 in. Alnico Horseshoe Magnet 22 lb. pull 5.5 MGOe Red 1. $15.48. Was: $23.22. Free shipping. Horseshoe Magnet Power Alnico Magnets 12 Lb Pull 370-2 General Retrieving Magnet

Performance Curve - Magnets - MPCO Magnetics釤鈷磁鐵 - 磁鐵工廠 - 右任磁電

Modern Method. Now there is a better way to create circular magnets. By creating just one single magnet specifically designed for your application, we are able to provide your company a product that is stronger, more reliable, and more efficient. The magnets are multi-pole - which does not compromise the magnetic properties Rong et al. reported the fabrication of SmCo 5 /FeCo isotropic nanocomposite magnet with a high (BH) max of 19.2 MGOe using warm compaction, which is a long-time record for Sm-Co based bulk system. More recently, high (BH) max of 26 MGOe has been reported in anisotropic bulk SmCo 7 /FeCo nanocomposite magnets fabricated by using temperature. MASTER MAGNETICS Ceramic Magnets. Made from strontium carbonate and iron oxide, ceramic magnets are charcoal gray and typically come in discs, rings, blocks and cylinders. Ceramic magnets have a host of applications including acting as separators on conveyor belts, parts in speaker magnets, within MRI systems and various other uses A Neodymium (Nd-Fe-B) magnet is a common rare earth magnet composed of neodymium (Nd), iron (Fe), boron (B), and transition metals. They have superior performance in applications because of their strong magnetic field, which is 1.4 teslas (T), a unit of magnetic induction or flux density. Neodymium magnets are categorized by how they are. SAMARIUM COBALT MAGNETS. Since the introduction of rare earth magnets in the 1970s, Electron Energy Corporation (EEC) has been the preferred source for manufacturing and supplying samarium cobalt magnets (SmCo). EEC's SmCo 33 grade material is one of the highest performance materials available, ideal across a range of applications, from.