Infrared camera window glare solution

1) Your camera is indoors looking through a window. If you have the camera looking through a window, the IR will bounce of the window. IR cameras cannot be mounted behind any other glass. 2) For cameras with a glass dome cover, you need to make sure the LED lights on the IR board are not being obstructed by the camera body Infrared glare (also called IR glare) is a common issue in security cameras with night vision. It happens when the front of a security camera is positioned too close to a wall or eaves. This video demonstrates the IR glare phenomenon, and how to prevent it when mounting a security camera This allows infrared lights to be cast in an area without actually visibly lighting the area. Infrared light is capable of shining through the glass but it will still create a reflection on a window which can hinder the security cameras image. How to stop IR reflection is a question that may come up when setting up your infrared security camera. Takeaways. Security cameras are usually the preferred way of increasing the safety of your home and family. To avoid a lot of potential problems and headaches from various issues caused by window glare or IR reflection, the installation of CCTV cameras inside the house looking outside through a window should be carefully researched and carried out Tip 1. Disable IR light at night to reduce IR security camera window glare/reflection. Tip 2. Get separate IR illuminators for infrared night vision security cameras and put IR illuminators outside. Tip 3. Choose a window mount security camera when using through or behind a glass window. Tip 4

To reduce the security camera window reflection or glare, you may choose the window security cameras that allow you to turn off the LED lights via the app, like Reolink RLC-422W, and then mount IR illuminators or automated external lights that can provide light source for the camera outside The glare reduction capabilities of 3M window film products like the Prestige Series provide a transparent solution that doesn't obstruct or distort your view from inside. Anti-glare film is effective as soon as it's installed, and can minimize glare by up to 95%. Additionally, anti-glare film requires no additional cleaning and maintenance

Common Issues with Security Camera Infrared (IR) / CCTV

How to Prevent Infrared (IR) Glare on your Security Camera

The security camera's infrared lights can reflect on glass and shiny surfaces. If you really need to have your security camera facing a window glass, please turn off the infrared light to prevent the reflection and glare during the night. You can also move the camera's position to avoid artificial light from poles to reflect on the lens Feb 16, 2007. #1. Hi, I bought a CCTV camera which has infrared LED lights for night vision. I want to use my camera from inside to look outside on my property through the window. It works fine during the day, but when the infrared lights come into play at night, the whole picture becomes messed up due to the double glazing window with the. Proposed solution is now: Using an IR filter applied to the outside wall to prevent the reflection from coming in and up to the camera as strongly, this leaves the inside smooth. Or applying a matte to the outside of the wall to blur the reflection, which also leaves the inside able to be perfectly smooth I was looking for a cheap way to cut down on the amount of sunlight that comes in through the windows in my shop, but still let me see out clearly. I did thi.. Many cameras don't have a way to turn night vision or IR lights off, creating an unusable picture filled with window glare. Nest Cam Outdoor IQ (along with others, like the regular Nest Cam and the Arlo Q,) can be used behind windows, but they're not ideal

I have disabled the IR leds, so as to avoid any window glare, and have illuminated my driveway with an external IR spotlight with a range of 10 metres - which is the length of the driveway. Whilst this is fine during the day, the night image is extremely poor, presumably because a lot of the IR light is being blocked by the double-glazing Lately, I have been receiving a lot of comments and emails about setting up a WiFi security camera through glass or through a window. They want to setup a ca.. Anti-glare window film does not limit the view out through windows nor does it reduce the welcome visible light that brightens the interior of your home or office. It simply alters the way the surface of the low-E windows rejects solar energy, all without reducing their efficacy in keeping the property cooler and better insulated

Anti Glare Film For Security Cameras- Does It Work

Install anti glare films over rear projection film in storefront windows to remove the glare on the glass detracting from the image. Removing glare off the glass increases image view-ability and helps the viewer focus on the content with less distraction. Anti-Glare Film applies to the exterior or viewing surface of the glass widow with rear. A 4 camera IR security system is the perfect solution if you need security or surveillance monitoring in total darkness. Electronic technological improvements have not only resulted in high quality equipment designed for this purpose, but have made infrared (IR) cameras very affordable too. Read mor * Glare occurs only when the camera is in black-and-white/IR-LED mode with the ceiling light off * A white-colored sensor is nearby Because a flame detector is positioned near the IR-LED irradiation opening of the camera, the infrared light issued from the camera is reflected by the flame detector, and is incident on the camera

How to Prevent Glare on a Surveillance Camer

Solution - Clean the glass portion of the camera using a microfiber cloth. Infrared Glare. Dirty glass is not the only thing that causes IR glare. Large bodies of water, lightly colored surfaces, foliage, and vehicles are all common causes of IR glare. A camera mounted too close to an overhang, eave, or soffit can also cause IR glare. Solution. Applies to: All Reolink cameras Description of the phenomenon: The night live stream image has white circles, glare, aperture, or light spot. Cause 1: Something like the spider webs or flying insects around the camera lens. Solution: Please check whether there is something around the camera lens especially at night. Please clear the camera lens to check again To prevent glare on a surveillance camera looking through a window, users could turn off or disable IR lights as well as status lights at night, which helps mitigate IR security camera window reflection and enable you to see through glass or glass window screen Naturally, the IR frequency the cameras use mean that this glare will not be visible to the naked eye, and as such you may not realise it is there until you watch the video back. In some cases it can be possible to reduce the glare by carefully adjusting the angle of the camera relative to the window, but this can be time consuming and is.

Wolf-Guard PIR motion sensor

LUXACRYL ® -IR is black acrylic sheet absorbing daylight, but allowing maximum transmittance of near-infrared light. It has all properties required by windows and filters in IR-applications such as light barriers, IR sensors, IR lamps, IR cameras, and control units (remote controls). The most common type of LUXACRYL ® -IR is black 1698 If the blinds are shining back from the outside, the box should still solve that as long as the camera is super close to the window and the box is large enough to block the reflection. But yeah, you may want to buy a black camera or color it black somehow so tht the camera itself doesn't glare back Checked out the image on the web page and all that is visible is the glow from the camera on the window and the window screen. Basically there is about 3 inches of visibility which makes the camera useless for night time. I attempted to adjust the brightness but that only affects the glare and does nothing for visibility past the screen

Anti-glare film for TV. Anti-glare Film for Windows. In case you want to maintain the aesthetic value or improve on the appearance of your windows, it is important to invest on high quality anti-glare film for windows. Windows with anti-glare film. Anti glare Film for Cars. To remain safe on the roads, you need anti-glare film for cars Plus, it's just easier to put the camera against a window. 2 - Night Vision mode in the Nest Cam uses two tools which you cannot 'un-bundle': It turns on 8 IR LEDs in the camera. It turns off an IR filter that Nest Cam uses during the day to help keep colors accurate. Turning that IR filter off makes the camera more sensitive to light (and. Window Film. Cover south- and west-facing windows with temporary heat-control window film to block direct glare from the sun. This film is specially designed to block ultraviolet rays from the sun. The system is from Costco. Swann 8 camera NVR (Poe) 3MP 1080p cameras. On one side of our house is a narrow walk way. I have two cameras facing in both directions. At night the IR reflection off the wall lights up the wall great but then everything else is pitch black. Is there a solution or trick to fix this The camera on the gorillapod on the floor. Set up your image and create a seal around the camera with fabric, you could use a piece of black cloth. It needs to be dark as a lighter colour will reflect as well. For these images a lightweight black jacket was held up against the window, to help prevent the reflections

Do Security Cameras Work through Glass or behind a Glass

Window Security Cameras: Best Picks & Can They See Through

  1. DEFENSELITE™. DefenseLite is a clear security shield that installs over existing window and door glass creating a layer of protection designed to 'keep the bad guys out'. A patented technology, DefenseLite is 250 times stronger than glass, nearly invisible once installed and an affordable solution that works. Utilizing proprietary high.
  2. If you want to get rid of glare that is a result of trying to put your camera inside and view outside through your window hang the canary flex by the accessory the twist mount and I am putting a light 15-18 below the camera and it gets rid of the reflective glare my idea:) I'm smarter than the average bea
  3. Infrared. Imaging systems designed to capture infrared light vary greatly depending on application. Some examples include the automotive and security industries as well as remote sensing and facial recognition. Imatest offers an array of targets that can be analyzed with Imatest Master and Imatest IT to provide statistics and metrics for.
  4. g, surfing or sharing on computers.
  5. Most cameras will use an infrared light and sensor to deliver a black and white image. The problem with IR on window-mounted cameras is that the glass causes a huge glare in the image, making.
  6. At first, the camera can have a lot of problems related to Infrared light reflection. So it's not recommended to install a security camera behind glass or window. A night vision camera comes with its LEDs adjusted to work with the acrylic dome or the glass that protects the camera
  7. Vandal dome cameras are particularly prone to corruption from external light sources. Camera mounted inside a window produces a white image at night. Well, it will do. The glass is a reflective surface and is right in front of the camera. The infrared will bounce off the glass straight into the lens causing the camera to dazzle itself

China Laser Window Infrared Glass Window Camera Window Industrial Optical Window Film, Find details about China Bk7 Wedge, Bk7 Wedge Window from Laser Window Infrared Glass Window Camera Window Industrial Optical Window Film - Jilin Province Henghua Optoelectric Co., Ltd Why You Choose WeeTect Anti-fog solution for screen protector is unique and full of challenge. You need a reliable and cost effective supplier to cooperate with to solve your problems. One-stop Anti-fog Solution Options for Anti-fog Film and Coating Optical Clarity Technology Military Background Anti-glare Coating as an Option Permanent Fog Resistant Effect Request Anti-fog Solution for. Supira solar window films can reduce the percentage of solar heat entering the building by up to 91% and the percentage of solar glare by up to 96% whilst still allowing light to pass through. Professional installation by certified installers and fitters. Commercial & domestic customers catered for

3M Anti-Glare Window Film Glare Control & Glare

If you're shopping for a high-performance window film that offers great looks, amazing protection and impressive heat-rejection properties, 3M Ceramic IR automotive tint is a great choice. Designed and manufactured by the world leader and creator of automotive window films, Ceramic IR is constructed with a nano-ceramic technology that will help keep your vehicle comfortable while enhancing. Through smoke, sun glare, and night, thermal cameras are extremely valuable addition to driver-assisted and autonomous vehicle systems. With their ability to register heat, they can see up to 4x further than headlights—seeing people, animals, and other vehicles better than other ADAS and AV sensor technologies

API's circular polarizing filters are optimal for display, camera, and sensor applications where sensitivity to linearly polarized light is an issue, but glare reduction is required. Circular polarization is also used in passive 3D applications as an alternative to a linear polarizer filter. API circular polarizers combine a linear polarizer. The film provides all of the basic benefits that you want from a window tint: privacy, less glare and heat, and a stylish look. It also blocks over 99% of UV rays. A roll that measures 24 x 78. The FLIR Support Center provides access to user manuals, software, firmware, and other product resources. Search for your product or model # to find support resources and contact information for our service and support teams Optical filter solutions for machine vision applications such as light sensors, cameras and scanners. This include: barcode readers, IR sensors, iris scanners, speed enforcement cameras, IR cameras. Display window and optical filter solutions for consumer applications, here among automotive, audio, set top boxes, home automation, telecom and. TruVision HD-TVI analog cameras and recorders provide 1080p HD quality video with the installation ease of existing analog coax systems. TruVision analog cameras include PTZ, (Pan, Tilt, Zoom), infrared, fixed and covert options that deliver superior optical quality for a variety of indoor and outdoor environments

All current models of Blink security cameras (outdoor, indoor, and mini) have infrared night vision. Depending on the model you're using, the configuration and customization may vary, however. If you're interested in Blink security cameras and are looking for a solution for nighttime monitoring, they are a solid choice Overcoming Glare on the Water If you find sunglare a problem when trying to read your GPS display then NuShield has the perfect antireflective screen protector solution for you. Read more Window Glare No Match for NuShield Screen Protector Harsh outdoor glare can be minimized with the NuShield Triple A antiglare screen protecto The optional IR camera works in conjunction with Windows 10 Hello hands-free authentication. Ambient sensing and low blue-light: Optional TUV-certified low blue light panels reduce eye strain, while ambient sensing adjusts your screen brightness so you can stay productive anytime, anywhere 600 TVL Super Resolution Camera. 728x488 effective pixels. Built-in microphone for listen-in surveillance (1-way audio) 1. IR Night Vision. See at night up to 60ft away in total darkness (85ft with ambient lighting) 2. Anti-glare feature. Built-in PIR motion sensor for accurate motion detection. Weatherproof design (IP66) for indoor and outdoor.

Smart Cameras Facing Outside: Do They Work Behind Windows

Step 4: Apply the Window Film. Starting at the top and keeping the top edge level, place the wet surface of the film on the wet glass, working down the window. If you have a crisp factory edge on the film, line it along the glass edge and make sure the rest of the film overlaps the window frame. You won't need to trim this edge Imatest 3.8 was released on May 14th 2011. Please contact sales@imatest.com for purchase or renewal information. Here is a complete list of changes: I3A CPIQ (Camera Phone Image Quality) enhancements: The Dot Pattern module has been added for analyzing distortion and lateral chromatic aberration (LCA). The Dot pattern and ISO-15739 charts have been added to Test Charts

Solved: Night settings to avoid reflections in the window

Can Security Cameras Work Through Glass? - Informin

Window Film Titanium Heat Control Reduce Glare Light Gray 48 in x 180 inch Decor 5 out of 5 stars (1) 1 product ratings - Window Film Titanium Heat Control Reduce Glare Light Gray 48 in x 180 inch Deco 3M Ceramic Car Window tint. 3M is known for its high-quality products backed by decades of science.. The 3M ceramic window tint product has all the benefits from the generic ceramic films but better.. The film offers 99% UV protection and up to a whopping SPF 1000! That's a lot of sunscreens. It rejects up to 66% of total solar energy and up to 95% of infrared heat rejection for optimal.

Anti glare film for security camera (does it work

33.8 cm (13.3 in) diagonal FHD IPS eDP anti-glare On-Cell WLED-backlit bent touchscreen, 250 nits, 45% NTSC, for HD+IR camera for WWAN (1920 x 1080) note: High-definition (HD) content is required to view high definition images. Resolutions are dependent upon monitor capability and resolution and color depth settings Night Vision video quality can be affected by Internet speed and other issues. But, most Night Vision-specific issues are caused by your camera's infrared light reflecting off a surface near your camera, like a shelf, window, window screen or wall. Symptoms include: A large light or dark ring in the vide

Camera's infrared light reflecting on the window AVForum

Some devices for academic use automatically update to Windows 10 Pro Education with the Windows 10 Anniversary Update. 35.56 cm (14.0 in) diagonal HD SVA eDP anti-glare slim, 220 nits, 45% NTSC for HD camera and two WLAN antennas (1366 x 768) 35.56 cm (14.0 in) diagonal HD SVA eDP anti-glare slim, 220 nits, 45% NTSC for HD and IR camera and. Windows 10 Pro - Lenovo recommends Windows 10 Pro for business. Display. 15.6 FHD (1920 x 1080) IPS, anti-glare, 72% NTSC, Dolby Vision ™, HDR, 500 nits. Graphics. NVIDIA ® Quadro ® T2000 with Max-Q 4GB. Camera. HD 720p with ThinkShutter privacy cover. Optional:IR & 720p HD Camera with with ThinkShutter. Memory UltraGlare Glare Control Window Films: Decorative Films, LLC. $11.95 UPS GROUND SHIPPING: Add any item to your cart for a flat rate of $11.95 for UPS Ground Shipping. FREE 2-DAY SHIPPING: Add $159.00 or more your cart, select the 2-Day Shipping option, and submit your order. Qualifying orders will arrive two business days from the date of shipment Transparent window films that provide heat rejection are those that reflect IR (Infrared light). These films are often transparent, but many absorb a lot of heat. Customers and installers have to be careful when deciding to use these films as they have the potential of damaging glass, seals, and even have adverse effects on the performance windows Apex Window Films' DIY Neutrals, Infrared (IR) and Ultraviolet (UV) Blocking series of solar control window films amazingly filter heat and glare, yet, the films in this category are less noticeable on glass than other tints and reflective films; The hues of these films range from neutral to clear making them highly sought after for residential do-it-yourslef window film projects

ENHANCE LCD Hood/ Sun Shade and Hard Screen Protector for

optics - Eliminating IR light reflection perceived by a

  1. One of the innovative and popular uses for Multi IR Optoelectronics' infrared coatings is in the production of IR windows. Our long-lasting, consistent IR windows are ideal for use as viewing panes, inspection grills and ports, thermal cameras, and other applications which require allowing infrared radiation to pass through for data.
  2. The Samsung SmartCam Pro doesn't have any decent night vision capability. It's got a single Infra-Red beam which projects up to 5m. Clearly inadequate for your requirements. As mentioned, far IR doesn't penetrate glass and therefore your camera behind a window will have no night vision
  3. Arctic Window Tinting offers solar, safety and decorative window films for both residential and commercial applications in the Washington DC Metro Area, Maryland and Northern Virginia. Call for a free on-site estimates at 301-332-5300. We are the top rated resource for window tinting and window films

Reducing The Glare From Windows For Video - YouTub

I am developing speed estimation and vehicle counting application with OpencV and I use IR camera. I am facing a problem of sun light reflection which causes vertical white region or lines in the images and has bad effect on my vehicle detections. I want an approach with very high speed, because it is a real-time application Glass. One of the most effective methods to hide from thermal imaging (to block IR) is to conceal behind glass. Glass is entirely opaque to thermal imaging. It's not a practical solution though, due to the obvious impracticality of movement or 'on-the-go'. But it's good to know MegaVideo Flex camera series offers a cost-effective security solution for installations that require a flexible, compact design. Due to its small footprint, the MegaVideo Flex easily fits into leading automated teller machines and tight spaces. These stylish indoor cameras feature a choice of 1.2MP, 1080p, 3MP, and 5-megapixel (MP) resolution. LP34 7 Near-IR Windows are antireflection coated windows that are optimized for near-infrared transmission, while still allowing visible light to pass. Commonly used as a protective cover glasses for cameras used at night in surveillance, LPR/ANPR and security applications, these windows are made of optically ground, polished and coated B270 optical crown glass Now there are home window tinting options to cut out infrared and UV without making your house gloomy. Infrared radiation simply put, heats things up. The heat you can feel from the pavement or car dashboard is infrared radiation. Infrared is what heats up your house on a sunny day and overworks the aircon

Best Window Security Cameras 2021 Reviews

Window tint works by reflecting, absorbing, and transmitting light from the sun. When choosing a shade, you will notice that they are designated by a percentage. This percentage represents the amount of light that will pass through the film and into your vehicle. So, a 70% share of window tint blocks 30% of the light that we see With its compact, vandal-resistant design, the camera is ideal for small interior spaces such as those found inside bus and light rail vehicles. Its powerful Wide Dynamic Range technology delivers high-quality images even in bright backlight or glare from windows. Its True Day/Night (TDN) and Infrared LEDs enable it to see in virtual darkness Description. WeeTect IR Blocking Film (WIRBF) also names heat resistant film which is a Nano coated PET film featuring both Ultraviolet (UV) and Infrared (IR) protection screens on the outer layer and an adhesive on the inner layer. It is a specially designed IR transparent plastic film for IR filter and IR reflective features An antireflective or anti-reflection (AR) coating is a type of optical coating applied to the surface of lenses and other optical elements to reduce reflection.In typical imaging systems, this improves the efficiency since less light is lost due to reflection. In complex systems such as telescopes and microscopes the reduction in reflections also improves the contrast of the image by.

Tips for mounting cameras behind glass? - Security Cameras

MaxCool IR is a nano ceramic window film that provides higher heat rejection and infrared rejection (IR) than standard dyed or metalized window film. MaxCool IR is engineered to keep the car feeling cooler due to a higher rejection of total solar energy and protect the interior from UVA and UVB rays. (We stock 80%, 50%, 35%, 20% & 5% MC Films) The best in network video: innovation, quality and opportunity Whatever you're looking for, you'll find an Axis network camera to suit your needs. From robust outdoor cameras to discreet products for sensitive environments, we offer it all Camera settings with Lenovo Vantage: This article provides information about adjusting the camera via Lenovo Vantage, and steps to disable the camera in windows For external use, IP65 is recommended (dust-tight and protected against water jets) as a minimum and add a sunshade to keep glare off the housing's window. In hot and cold environments ventilating fans/blowers can be specified to reduce camera temperatures and thermostatically-controlled electrical heaters to prevent window misting The Ecobee SmartCamera is a versatile Wi-Fi-enabled indoor camera that offers built-in Alexa functionality, digital pan and tilt, and interoperability with Ecobee's Haven home monitoring platform

Good quality cable is also a must for any installation. 2. Infrared Glare and White Out. Reflective and larger lightly colored surfaces are common causes of IR glare. In addition, objects. in via the IR camera and Windows Hello, all without lifting a finger. It locks when you walk away, so your work stays safer.23 Dell Optimizer extends runtime and improves battery performance by adapting to your patterns. ExpressCharge Boost delivers up to 35% charge in about 20 minutes, or up to 80% charge in an hour with ExpressCharge.2 DELL OptiPlex 7760 AIO-27 FHD 1920x1080 IPS Touch Anti-Glare, IR Camera, Integrated Graphics, Platinum PSU, Windows 10 Pro 64bit English; Intel Core Desktop Computers (37

2013 Pace American 5 X 8 Cars for sale

Wyze Cam WiFi Security Camera Behind Glass Window Setup

  1. us on the other side. There is a marker in the scale that indicates the correct exposure position. Keep the marker to the side of plus sign if the picture does not get the lighting so that the picture will be much bright
  2. FLIR today announced the next-generation thermal vision Automotive Development Kit (ADK™) for the development of self-driving cars. FLIR also unveiled a thermal-enhanced self-driving test vehicle that demonstrates how thermal cameras improve the safety of advanced driver-assistance systems (ADAS) and fills performance gaps in the autonomous vehicles (AV) of tomorrow with systems including.
  3. The interior camera is also Full HD 1080p and is typically mounted on the front windshield, facing inwards, to capture the inside of the cabin, even in pitch black conditions (thanks to the help of the built-in infrared LEDs). The A129 Duo IR can accept up to a 256GB MicroSD card, so you'll never have to worry about having enough room for footage

2. They CAN'T See Through Walls. We often get asked if a thermal camera will be able to see through a wall. The short answer is no, except in extreme circumstances. As most walls are thick to keep buildings insulated, a thermal camera has no way of picking up on the heat on the other side of the wall IR LEDs transmit on wavelengths from 850nm to 1100nm. These are what are used. for IR remotes, etc. Invisible to the eye but visible to silicon digital camera sensors. Visible light is is 390-750nm. Silicon is used as sensors, and silicon absorbs these wavelengths Reolink Lumus. Indoor with Pan-Tilt. Affordable, easy-to-use & smart home camera sees entire room with 355° pan & 50° tilt. E1 E1 Pro E1 Zoom. Outdoor/Indoor with Zoom. Examine areas of interest in detail with 5MP 4X optical zoom cam. RLC-511W. Build your security system for 24/7 recording. 4K 8-Channel PoE Kit The FUJITSU Ultra-Mobile Premium portfolio is designed for business professionals seeking optimum mobility when on the road. A robust magnesium casing houses the 8th generation Intel® Core™ processor, while FHD anti-glare displays ensure ergonomic working wherever you are. Integrated PalmSecure® or fingerprint sensors protect your data at. Outdoor IP Camera Housing From Garden Lamps: Recently, a friend of mine who regularly installs IP security systems found he had a surplus of cameras and was looking to get rid of them. I had an uninvited guest relieve me of a few things a couple of years ago and had been considering putting

Elo has the broadest portfolio of touchscreen components to serve the unique requirements of OEM designers. With over 40 years of touch technology expertise, a broad selection of touch screen products, and quick-turn customization capabilities, Elo is the perfect one-stop-shop for your next generation Smart Manufacturing / Industry 4.0 or commercial IoT HMI hardware solution The HP Spectre x360 13 is back and with it comes an all-new design. HP has fixed the giant bezels and not-so-hot trackpad making its latest model one of the best choices to maximize your dollar PMMA / Acrylic optical filter solutions. Acrylic is not just acrylic. Our PMMA has unsurpassed optical properties, making it perfect for a wide range of applications. Add one of our surface treatments especially developed for our Solaris™ cast acrylic and meet your demands for scratch resistance, anti-reflection or anti-glare (non-glare)

XPG's Xenia Xe is an interesting Ultrabook from a company that's just emerging onto the consumer laptop scene. It has a ton of awesome features, but it's also held back by some design choices The MidOpt LP8000 Germanium Window has a DLC (diamond-like carbon) coating that is abrasion-resistant and can withstand harsh environments. It has a 7.5-12.5 micron useful range and is an ideal protective window for thermal camera enclosures. It also has an anti-reflection coating to maximize transmission when thermal imaging in the LWIR. • The LWIR camera was the only sensor that detected pedestrians in full darkness. The LWIR camera also proved more resilient to glare caused by oncoming head-lamps in the fog. • Visible RGB, SWIR, and NIR cameras sometimes missed a pedestrian because she/he was hidden by headlamp glare. Figure 5. Passive thermal sensing can detect pedestrians ThinkSmart Controller is a 10.1-inch ten-point touch screen powered by USB-C. The ThinkSmart Controller is a 10.1-inch ten-point touch screen powered by USB-C (10-meter cable included) with its integrated stand with a 30-degree or 60-degree viewing angle. Integrated Infrared sensors detect when participants enter the room and a 3.5mm headphone jack provides direct audio connection